Spatial Manager™ for AutoCAD - FAQs: How to Start?

From Spatial Manager wiki
(Difference between revisions)
Jump to: navigation, search
m
m
 
(37 intermediate revisions by one user not shown)
Line 1: Line 1:
 
==A powerful AutoCAD plug-in but, how to Start it?==
 
==A powerful AutoCAD plug-in but, how to Start it?==
''If you comes here from the shortcut that starts the application, go directly to the paragraph below that starts as: "Finally, when you install Spatial Manager™ for AutoCAD, the setup application..."''
+
''If you come here from the shortcut that starts the application, go directly to the paragraph below that starts: "Finally, when you install Spatial Manager™ for AutoCAD, the setup application..."''
  
  
''Have you downloaded the setup program? If not, you need to download it from the *[http://www.spatialmanager.com/download/spatial-manager-autocad/ Spatial Manager™ for AutoCAD Download link]''
+
''Have you downloaded the setup program? If not, you need to download it from the [http://www.spatialmanager.com/download/spatial-manager-autocad/ Spatial Manager™ for AutoCAD Download link]''
  
  
 
First of all you need to install Spatial Manager™ for AutoCAD by executing the setup program. The name of the file to run will be different for each release of the application. It will appear as follows: ''SpatialManagerforAutoCAD-X.exe'', where "X" is the release number of the application
 
First of all you need to install Spatial Manager™ for AutoCAD by executing the setup program. The name of the file to run will be different for each release of the application. It will appear as follows: ''SpatialManagerforAutoCAD-X.exe'', where "X" is the release number of the application
 
+
*''Notes:''
<u>32-bit and 64-bit versions</u>: there are 32-bit and 64-bit versions of Spatial Manager™ for AutoCAD but you do not need to worry about what platform is selected because the setup program automatically chooses the same version as the AutoCAD installed
+
**''32-bit and 64-bit versions: There are 32-bit and 64-bit versions of Spatial Manager™ for AutoCAD but you do not need to worry about what platform is selected because the setup program automatically chooses the same version as the AutoCAD installed''
 +
**''If the installation process does not produce any errors but later you cannot execute any 'Spatial Manager™ for AutoCAD' commands and/or the application's user interface does not appear in AutoCAD, please run AutoCAD "as administrator" and try again''
 +
**''"Quiet" setup: You can install the application in "quiet" mode using the "/quiet" parameter, which will adopt the default values (installation path, etc.) and it will not be necessary to follow the installation process step by step. For example, from de Windows command line you can execute: [Path]/SpatialManagerforAutoCAD-X.exe /quiet''
 +
***''"[Path]" is any local or networked path, where the installation EXE file can be found''
 +
***''"X" is the release number of the application''
 +
***''Note also that this command can be executed from a batch file (*.bat), which will facilitate the deployment of network or remote installations''
  
  
Line 17: Line 22:
  
  
Finally, when you install Spatial Manager™ for AutoCAD, the setup application also adds the Interface components to AutoCAD and a Sample data set including some spatial files to your system. Watch this short video and follow the next steps to learn how to start using the application and to check that everything works fine. ''Note: some components in the video (interface, windows look, etc.) may be slightly different that will appear on your computer''
+
Finally, when you install Spatial Manager™ for AutoCAD, the setup application also adds the Interface components to AutoCAD and a Sample data set including some spatial files to your system. Watch this short video and follow the next steps to learn how to start using the application and to check that everything works fine
 +
 
 +
*''Note 1: The Sample data folder (and subfolders) is a read-only folder, so select another folder when trying to write data through Export processes, etc.''
 +
*''Note 2: Some components in the video (interface, windows look, etc.) may be slightly different that will appear on your computer''
 +
 
  
 
{{#ev:youtube|pmm0F1F9om8}}
 
{{#ev:youtube|pmm0F1F9om8}}
Line 23: Line 32:
  
 
*Start AutoCAD and create a new drawing
 
*Start AutoCAD and create a new drawing
*Select the new "Spatial Manager" tab which you will find in the AutoCAD Ribbon
+
*Options to access the application Commands
 +
**New "Spatial Manager" tab in the AutoCAD Ribbon (if the Ribbon is available)
 +
**New "Spatial Manager" Toolbar
 +
**New "Spatial Manager" drop-down Menu
  
  
[[Image:SpatialManagerforAutoCAD-Ribbon63.png|border|Spatial Manager™ for AutoCAD Ribbon]]
+
[[Image:CADInterface-Clean2.png|Spatial Manager™ for AutoCAD Interface]]
  
  
*Click on the "Palette" button to open the SPATIALMANAGER palette, which includes the main functions of Spatial Manager™ for AutoCAD
+
*Click on the "Show Palette" button to open the SPATIALMANAGER palette, which includes the main functions of Spatial Manager™ for AutoCAD
 
**If you cannot or you do not want to access to the Ribbon, key in "SPM" in the Command line to open the palette
 
**If you cannot or you do not want to access to the Ribbon, key in "SPM" in the Command line to open the palette
 
**Problems with the AutoCAD Ribbon? See the Notes below
 
**Problems with the AutoCAD Ribbon? See the Notes below
Line 36: Line 48:
 
*Use the default parameters in all Wizard steps
 
*Use the default parameters in all Wizard steps
 
*Check the imported AutoCAD Objects
 
*Check the imported AutoCAD Objects
**Please, take a look to the limitations of the *[[*[[Spatial Manager™ for AutoCAD | Application introduction, main features, demo video, all the Commands]]*[[Spatial Manager™ for AutoCAD | Application introduction, main features, demo video, all the Commands]] | Trial version]]
+
**Note for the Trial version users: take a look to the application [http://wiki.spatialmanager.com/index.php/Spatial_Manager%E2%84%A2_for_AutoCAD_-_FAQs:_Licenses#What_is_the_.22Trial_version.22_of_the_application.3F Limitations in this Version]
 
*Import more Shapefiles (SHP) into the same drawing or into new drawings while choosing different import options
 
*Import more Shapefiles (SHP) into the same drawing or into new drawings while choosing different import options
*Try to import another kind of spatial files such as Google Earth KML, GPS/GPX, SQLite or XYZ point files
+
*Try to import other kind of spatial files such as Google Earth KML, GPS/GPX, SQLite or XYZ point files
**Note about Coordinate Reference Systems (CRS): if you want to merge into the same drawing spatial data which has been saved using differents CRSs, you need to Transform the Coordinates of the incoming data so that they are consistent with each other. This can help you learn how the Coordinate Transformation works in the application. In the sample data set, the Shapefiles (SHP) and the SQLite and XYZ files were saved using the CRS "NAD27 / California zone I" (SRID=26741), and the KML and GPX files were saved using the CRS "WGS 84" (SRID=4326) (mandatory for these formats)
+
**Note about Coordinate Reference Systems (CRS): if you want to merge into the same drawing spatial data which has been saved using differents CRSs, you need to Transform the Coordinates of the incoming data so that they are consistent with each other. This can help you learn how the Coordinate Transformation works in the application. In the sample data set, the Shapefiles (SHP) and the SQLite and XYZ files were saved using the CRS "WGS 84 / Pseudo-Mercator" (SRID=3857), and the KML and GPX files were saved using the CRS "WGS 84" (SRID=4326) (mandatory for these formats)
  
  
Line 51: Line 63:
 
==So what now?==
 
==So what now?==
 
Now you can try to import your own spatial data and create your own Shortcuts and User Data Sources. We recommend you take a look to these Wiki pages to learn more about:  
 
Now you can try to import your own spatial data and create your own Shortcuts and User Data Sources. We recommend you take a look to these Wiki pages to learn more about:  
*[[Spatial Manager™ for AutoCAD | Application introduction, main features, demo video, all the Commands]]
+
*[[Spatial Manager™ for AutoCAD | Application introduction, main features, demo videos, Commands list]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Licenses | Licenses, activation, support, updates, purchasing options]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Licenses | Licenses, activation, support, updates, purchasing options]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Compatible AutoCAD applications| Current compatible AutoCAD applications]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Compatible AutoCAD applications| Current compatible AutoCAD applications]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Providers| Application Data Providers]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Providers| Application Data Providers]]
*[[Spatial Manager™ for AutoCAD - FAQs: Interface | Interface, Wizards, Options]]
+
*[[Spatial Manager™ for AutoCAD - FAQs: Interface | Interface, Wizards, Options, Configurations]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Data sources | Data sources, Shortcuts, User Data Sources]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Data sources | Data sources, Shortcuts, User Data Sources]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Spatial files | Spatial files]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Spatial files | Spatial files]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Databases | Databases, Data stores]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Databases | Databases, Data stores]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Import | Import processes, parameters, coordinate transformation, extended data, tasks]]
 
*[[Spatial Manager™ for AutoCAD - FAQs: Import | Import processes, parameters, coordinate transformation, extended data, tasks]]
*[[Spatial Manager™ for AutoCAD - FAQs: Export ("Professional" edition only) | Export processes, parameters, coordinate transformation, extended data]] ("Professional" edition only)
+
*[[Spatial Manager™ for AutoCAD - FAQs: Export ("Professional" edition only) | Export processes, parameters, coordinate transformation, export to Google Earth, extended data]] ("Professional" edition only, except "Export to Google Earth" on "Standard" and "Professional" editions)
 
*[[Spatial Manager™ for AutoCAD - FAQs: Data Structure Management ("Standard" and "Professional" editions only) | Create or edit data tables, attach, detach or select objects]] ("Standard" and "Professional" editions only'')
 
*[[Spatial Manager™ for AutoCAD - FAQs: Data Structure Management ("Standard" and "Professional" editions only) | Create or edit data tables, attach, detach or select objects]] ("Standard" and "Professional" editions only'')
*[[Spatial Manager™ for AutoCAD - FAQs: Background Maps ("Standard" and "Professional" editions only) | Display or hide Background image Maps]] ("Standard" and "Professional" editions only'')
+
*[[Spatial Manager™ for AutoCAD - FAQs: Background Maps ("Standard" and "Professional" editions only) | Use Background image Maps, reference Maps]] ("Standard" and "Professional" editions only'')
 +
*[[Spatial Manager™ for AutoCAD - FAQs: Application Programming Interface (API) ("Professional" edition only) | Application Programming Interface (API)]] ("Professional" edition only'')
 +
 
  
 
And some useful links to other pages of Spatial Manager™ for AutoCAD:
 
And some useful links to other pages of Spatial Manager™ for AutoCAD:
*[http://www.spatialmanager.com Spatial Manager™ web]
 
 
*[[Spatial Manager™ for AutoCAD Changelog | Changelog]]
 
*[[Spatial Manager™ for AutoCAD Changelog | Changelog]]
 +
*[[Coordinate Systems objects list | Coordinate Systems objects list]]
 
*[[Spatial Manager™ for AutoCAD EULA | End User License Agreement]]
 
*[[Spatial Manager™ for AutoCAD EULA | End User License Agreement]]
 +
*[http://www.spatialmanager.com Spatial Manager™ web]
 +
 +
 +
 +
==Related links==
 +
*[http://www.spatialmanager.com/repair-when-adding-more-autocad-or-bricscad-products/ “Repair” when adding or updating AutoCAD products]

Latest revision as of 14:36, 22 May 2019

[edit] A powerful AutoCAD plug-in but, how to Start it?

If you come here from the shortcut that starts the application, go directly to the paragraph below that starts: "Finally, when you install Spatial Manager™ for AutoCAD, the setup application..."


Have you downloaded the setup program? If not, you need to download it from the Spatial Manager™ for AutoCAD Download link


First of all you need to install Spatial Manager™ for AutoCAD by executing the setup program. The name of the file to run will be different for each release of the application. It will appear as follows: SpatialManagerforAutoCAD-X.exe, where "X" is the release number of the application

  • Notes:
    • 32-bit and 64-bit versions: There are 32-bit and 64-bit versions of Spatial Manager™ for AutoCAD but you do not need to worry about what platform is selected because the setup program automatically chooses the same version as the AutoCAD installed
    • If the installation process does not produce any errors but later you cannot execute any 'Spatial Manager™ for AutoCAD' commands and/or the application's user interface does not appear in AutoCAD, please run AutoCAD "as administrator" and try again
    • "Quiet" setup: You can install the application in "quiet" mode using the "/quiet" parameter, which will adopt the default values (installation path, etc.) and it will not be necessary to follow the installation process step by step. For example, from de Windows command line you can execute: [Path]/SpatialManagerforAutoCAD-X.exe /quiet
      • "[Path]" is any local or networked path, where the installation EXE file can be found
      • "X" is the release number of the application
      • Note also that this command can be executed from a batch file (*.bat), which will facilitate the deployment of network or remote installations


Next, you will see the Spatial Manager™ for AutoCAD icon placed on the Windows Desktop, which will let you return to this Wiki page anytime you want to


SpatialManagerforAutoCAD-Icon.png


Finally, when you install Spatial Manager™ for AutoCAD, the setup application also adds the Interface components to AutoCAD and a Sample data set including some spatial files to your system. Watch this short video and follow the next steps to learn how to start using the application and to check that everything works fine

  • Note 1: The Sample data folder (and subfolders) is a read-only folder, so select another folder when trying to write data through Export processes, etc.
  • Note 2: Some components in the video (interface, windows look, etc.) may be slightly different that will appear on your computer




  • Start AutoCAD and create a new drawing
  • Options to access the application Commands
    • New "Spatial Manager" tab in the AutoCAD Ribbon (if the Ribbon is available)
    • New "Spatial Manager" Toolbar
    • New "Spatial Manager" drop-down Menu


Spatial Manager™ for AutoCAD Interface


  • Click on the "Show Palette" button to open the SPATIALMANAGER palette, which includes the main functions of Spatial Manager™ for AutoCAD
    • If you cannot or you do not want to access to the Ribbon, key in "SPM" in the Command line to open the palette
    • Problems with the AutoCAD Ribbon? See the Notes below
  • Expand the "Sample data" Shortcut to access the sample Shapefiles (SHP)
  • Right-click over any Shapefile (SHP) to import the spatial information as AutoCAD Objects into the current drawing or into a new drawing
  • Use the default parameters in all Wizard steps
  • Check the imported AutoCAD Objects
  • Import more Shapefiles (SHP) into the same drawing or into new drawings while choosing different import options
  • Try to import other kind of spatial files such as Google Earth KML, GPS/GPX, SQLite or XYZ point files
    • Note about Coordinate Reference Systems (CRS): if you want to merge into the same drawing spatial data which has been saved using differents CRSs, you need to Transform the Coordinates of the incoming data so that they are consistent with each other. This can help you learn how the Coordinate Transformation works in the application. In the sample data set, the Shapefiles (SHP) and the SQLite and XYZ files were saved using the CRS "WGS 84 / Pseudo-Mercator" (SRID=3857), and the KML and GPX files were saved using the CRS "WGS 84" (SRID=4326) (mandatory for these formats)


Notes about the AutoCAD Ribbon issues:

  • If you have no AutoCAD Ribbon, you can open it using the "_RIBBON" command in AutoCAD
  • Cannot see the "Spatial Manager" tab in the Ribbon? Try to run AutoCAD applying a clean profile
  • Other AutoCAD Ribbon issues


[edit] So what now?

Now you can try to import your own spatial data and create your own Shortcuts and User Data Sources. We recommend you take a look to these Wiki pages to learn more about:


And some useful links to other pages of Spatial Manager™ for AutoCAD:


[edit] Related links

Personal tools
Namespaces

Variants
Actions
Navigation
Products
Toolbox