Spatial Manager™ for AutoCAD - FAQs: Search Location ("Professional" edition only)

Notes:

• Some components in the images on this page (providers, names, windows look, etc.) may be slightly different from those that will appear on your computer
• Some application functions need to access the Internet from the application itself. If you experiment problems in any process, ask your network administrator if there is a Proxy server installed on your network. You can configure the Proxy settings through the application options

Introduction

• Objective of this section
  • xxx

• Topics in this section
  • xxx

How can I get elevation 3D Points, create Contours or Terrain 3D models?

Spatial Manager™ for AutoCAD includes the 'SPMTERRAIN' command that allows you to create Terrains and other related objects. Three options are available when this command is executed:

• 1 Elevations, which is a shortcut to get 3D Points on your drawing from Internet elevation providers in any earth area (Data sources)
• 2 Contours, which is a shortcut to create 2D or 3D Contours in your drawing from 3D Points, Block References or Terrains. Below you can review the options available for this function
• 3 Terrain Wizard, which allow you to access the Terrain wizard in order to run one or more Terrain chained processes (Obtain elevation 3D Points, and/or create Contours, and/or create Terrain 3D models, and/or project any Raster Image or Background Map to Terrains)

As you can see in the following image, these options are found on any application interface component ready to run separately

'Search Location' results window

What are the contents of the different sections in the Terrain wizard?

The Spatial Manager™ for AutoCAD Terrain wizard (Third button in "Terrain" group) includes three sections (see the image below):

• Source - Starting data. Select one of the following options:
  • Select points from drawing. Allows you to select any number of Points or Block References in your drawing in order to create Contours (Polylines) for this point cloud, and/or create one Terrain 3D model for this point cloud (AutoCAD 2010 and upper), and apply (project and fit) a Raster Image or Background Map texture to this Terrain (AutoCAD 2012 and upper)
    • Download elevations from online services for points with Z=0. This option allows you to get the elevation values (Z-coordinates) for any selected object with Z=0 from Internet elevation providers (Data sources). If all the selected objects have Z=0, a pop-up window will alert you about it and you will be able to activate this option from the warning itself. The drawing must be geolocalized before using this option
  • Elevations from online services. Allows you to define an rectangular area in your drawing for any earth location in order to create a 3D Points grid from Internet elevation providers in the selected area (Data sources), and/or create Contours (Polylines) for this point cloud, and/or create one Terrain 3D model for this point cloud (AutoCAD 2010 and upper), and apply (project and fit) a Raster Image or Background Map texture to this Terrain (AutoCAD 2012 and upper)
    • Notes:
      • Select the Elevation (Z) units. The options available in the drop-down menu will display all the units available in the Coordinate Systems objects list
      • You can also choose the grid resolution in meters. Available values are proposed and limited according the resolution returned by the elevation service
      • The drawing must be geolocalized before using this option
  • Terrain. Allows you to select one or more Terrain 3D models in your drawing in order to extract their 3D point geometries (vertexes) and create a 3D points cloud, and/or create Contours (Polylines) for this point cloud, and/or create one Terrain 3D model for this point cloud (AutoCAD 2010 and upper), and apply (project and fit) a Raster Image or Background Map texture to the selected or created Terrain(s) (AutoCAD 2012 and upper)
• Processing options
  • Reduce points to evaluate
    • If you selected 3D Points in the previous section (from the drawing or by creating a grid), here you can reduce the number of points used in the calculation of objects in the next section (3D Points and/or Contours and/or Terrain)
    • A reduction of points will improve the speed of objects generation but will result in objects with simpler geometry
  • Elevation exaggeration
    • This factor will multiply the resulting Z coordinates of objects calculated in the next section (3D Points and/or Contours and/or Terrain)
    • The exaggeration does not affect the numerical values that may result from the calculation, such as the elevation labels or the values in the elevation table of the contour lines (see next article)
  • Note: You will see at the top of this section the total number of objects currently selected
• Objects to create - Resulting objects. Depending on the option you have chosen in the first section, you will be able to select one or more of the objects to be created in the process
  • 3D Points
  • Contours. See the "Contour options" in the next article
  • Terrain. You can choose what AutoCAD 3D object will be used to create the Terrain 3D model (AutoCAD 2010 and upper). The available options depend on each AutoCAD version
  • Apply texture to terrain. You can select any Raster Image in drawing or any available Background Map (preset or user-defined) whose images will be projected an fitted to one or more Terrains, as well the desired map detail level (AutoCAD 2012 and upper)
    • Notes:
      • If you choose the "Map" option and any Background Map is shown on the drawing, this will be automatically selected though you can select any other
      • The drawing must be geolocalized and saved in order to apply this option. A "material" PNG image of the map will be saved in the same folder as the drawing
      • The drawing Visual Style will be automatically changed to "Realistic" when you select this option

'Terrain' wizard window

How do I create Contours and what options are available?

As you can read in the previous articles, in Spatial Manager™ for AutoCAD you can create 2D or 3D Contour Polylines through the Terrain wizard ('SPMTERRAIN' option '3 Terrain Wizard' - Third button in "Terrain" group) or directly through the Contours shortcut ('SPMTERRAIN' option '2 Contours' - Second button in "Terrain" group). You will find the following available Contour options (see image below):

• Top group
  • Minor interval. Contours Interval (Minor Contours)
    • Note: At the bottom of this section you will see the total number of Contour Polylines that will be created according to the chosen interval
  • Major every. Every how many Minor Contours one is considered Major Contour
  • Smoothing. Contour Polylines smoothing level
  • Layer. Layers for Minor and Major Contours
• Colours. Colour models. You can choose one of the following options:
  • None. By layer. If it is necessary to create new layers according to the ones defined in the previous section, they will be assigned random colors that will be different for the Minor and Major Contour Polylines
  • By contour type. You can choose the colours for Major and Minor Contour Polylines
  • By altitude. The Contour Polylines will be created using an automatic colours ramp from which you can choose the colours for the lowest Contour and the highest Contour
• Labels. Contour elevation Labels
  • Label elevations. Check it if you want Labels
  • Label also minor contours. The Major Contours will be labeled but you must check this option if you also want to label the Minor Contours
  • Style, Justify, Height. You can define the Style, Height and Justification of the Labels here
  • Insert a label each. You can also specify the separation in drawing units between Labels to be repeated along the Contour Polylines
  • Note: The number of decimals places for the numeric values in the Labels will be consistent with the Contour Interval chosen above
• Elevation options
  • Create contours without elevation (2D). Contour Polylines will placed in their corresponding Z Elevation (3D Contours) unless you check this option to place them in the XY plane regardless of their Elevations (2D Contours)
  • Append data table with elevation values. When checking this option, the Contour Polylines will be attached to a data Table that will include the "Elevation" field. The Table will also include another field ("Major") that will indicate if it is a Minor or a Major Contour. You can specify the data Table name below

Creating Contours options

Related links

• Go to FAQS