Difference between revisions of "Spatial Manager™ for BricsCAD - FAQs: Search Location ("Professional" edition only)"

From Spatial Manager Wiki
Jump to navigation Jump to search
 
m
Line 1: Line 1:
[[image:SPM AutoCAD Wiki to Website.png|150px|link=http://www.spatialmanager.com/spm-forautocad/ |Spatial Manager™ for AutoCAD product page]] [[image:SPM AutoCAD Wiki to Download.png|150px|link=http://www.spatialmanager.com/download/spatial-manager-autocad/ |Download Spatial Manager™ for AutoCAD]]
+
[[image:SPM BricsCAD Wiki to Website.png|150px|link=http://www.spatialmanager.com/spm-forbricscad/ |Spatial Manager™ for BricsCAD product page]] [[image:SPM BricsCAD Wiki to Download.png|150px|link=http://www.spatialmanager.com/download/spatial-manager-bricscad/ |Download Spatial Manager™ for BricsCAD]]
  
  
Line 5: Line 5:
 
''Notes:''
 
''Notes:''
 
*''Some components in the images on this page (providers, names, windows look, etc.) may be slightly different from those that will appear on your computer''
 
*''Some components in the images on this page (providers, names, windows look, etc.) may be slightly different from those that will appear on your computer''
*''Some application functions need to access the Internet from the application itself. If you experiment problems in any process, ask your network administrator if there is a Proxy server installed on your network. You can configure the [[Spatial_Manager%E2%84%A2_for_AutoCAD_-_FAQs:_Interface#Options|Proxy settings through the application options]]''
+
*''Some application functions need to access the Internet from the application itself. If you experiment problems in any process, ask your network administrator if there is a Proxy server installed on your network. You can configure the [[Spatial_Manager%E2%84%A2_for_BricsCAD_-_FAQs:_Interface#Options|Proxy settings through the application options]]''
  
  
Line 19: Line 19:
  
 
===xxx===
 
===xxx===
Spatial Manager™ for AutoCAD xxx
+
Spatial Manager™ for BricsCAD xxx
  
  
[[Image:SPMSearchLocationCAD.png|border|'SPMSEARCHLOCATION' command in the Spatial Manager™ for AutoCAD ribbon]]
+
[[Image:SPMSearchLocationCAD.png|border|'SPMSEARCHLOCATION' command in the Spatial Manager™ for BricsCAD ribbon]]
  
  
Line 33: Line 33:
  
 
===xxx===
 
===xxx===
The Spatial Manager™ for AutoCAD
+
The Spatial Manager™ for BricsCAD
  
  
  
 
===Need to have some reference in the drawing to use 'Search Location'?===
 
===Need to have some reference in the drawing to use 'Search Location'?===
If the drawing is not empty when 'SPMSEARCHLOCATION' is executed, it is necessary that the drawing has been assigned a Coordinate Reference System (CRS) in order that the application "knows how-to" insert the selected geometries. If this is not the case, you can assign a CRS to the drawing (and modify it) using the command 'SPMSETCRS' of Spatial Manager™ for AutoCAD. By executing this command you will access the CRS catalog of the application where you can:  
+
If the drawing is not empty when 'SPMSEARCHLOCATION' is executed, it is necessary that the drawing has been assigned a Coordinate Reference System (CRS) in order that the application "knows how-to" insert the selected geometries. If this is not the case, you can assign a CRS to the drawing (and modify it) using the command 'SPMSETCRS' of Spatial Manager™ for BricsCAD. By executing this command you will access the CRS catalog of the application where you can:  
 
*Filter the CRSs by type (Geocentric, Projected, etc.). The type "Projected" will be selected by default because is the most common choice
 
*Filter the CRSs by type (Geocentric, Projected, etc.). The type "Projected" will be selected by default because is the most common choice
 
*Choose a CRS by clicking on its row in the table
 
*Choose a CRS by clicking on its row in the table
 
*Search CRSs by typing the search criteria in the "Search" box. You can type here as many words as you like separated by blanks. The application will find all the rows including all these words in any column of the table
 
*Search CRSs by typing the search criteria in the "Search" box. You can type here as many words as you like separated by blanks. The application will find all the rows including all these words in any column of the table
 
*Unassign (undefine) the Coordinate System of the drawing, by choosing "Undefined CRS" (EPSG 0)
 
*Unassign (undefine) the Coordinate System of the drawing, by choosing "Undefined CRS" (EPSG 0)
If the drawing is empty and has no coordinate system assigned to it, when 'SPMSEARCHLOCATION' is executed Spatial Manager™ for AutoCAD will assign the CRS Code:3857 (WGS84 / Pseudo-Mercator) to the drawing. This CRS is valid for any Earth area, but may be inaccurate for measurements in some areas. If you want to configure any other known local CRS, use the 'SPMSETCRS' command as explained above
+
If the drawing is empty and has no coordinate system assigned to it, when 'SPMSEARCHLOCATION' is executed Spatial Manager™ for BricsCAD will assign the CRS Code:3857 (WGS84 / Pseudo-Mercator) to the drawing. This CRS is valid for any Earth area, but may be inaccurate for measurements in some areas. If you want to configure any other known local CRS, use the 'SPMSETCRS' command as explained above
  
 
* ''Notes:''
 
* ''Notes:''
Line 51: Line 51:
  
  
[[Image:SPMSetCrs25.png|border|'SPMSETCRS' command in the "Spatial Manager™ for AutoCAD ribbon]]
+
[[Image:SPMSetCrs25.png|border|'SPMSETCRS' command in the "Spatial Manager™ for BricsCAD ribbon]]
  
  
Line 64: Line 64:
  
  
*[[Spatial Manager™ for AutoCAD#FAQs|Go to FAQS]]
+
*[[Spatial Manager™ for BricsCAD#FAQs|Go to FAQS]]
  
  
  
[[image:SPM AutoCAD Wiki to Website.png|150px|link=http://www.spatialmanager.com/spm-forautocad/ |Spatial Manager™ for AutoCAD product page]] [[image:SPM AutoCAD Wiki to Download.png|150px|link=http://www.spatialmanager.com/download/spatial-manager-autocad/ |Download Spatial Manager™ for AutoCAD]]
+
[[image:SPM BricsCAD Wiki to Website.png|150px|link=http://www.spatialmanager.com/spm-forbricscad/ |Spatial Manager™ for BricsCAD product page]] [[image:SPM BricsCAD Wiki to Download.png|150px|link=http://www.spatialmanager.com/download/spatial-manager-bricscad/ |Download Spatial Manager™ for BricsCAD]]

Revision as of 19:10, 29 March 2020

Spatial Manager™ for BricsCAD product page Download Spatial Manager™ for BricsCAD


Notes:

  • Some components in the images on this page (providers, names, windows look, etc.) may be slightly different from those that will appear on your computer
  • Some application functions need to access the Internet from the application itself. If you experiment problems in any process, ask your network administrator if there is a Proxy server installed on your network. You can configure the Proxy settings through the application options


Introduction

  • Objective of this section
    • xxx
  • Topics in this section
    • xxx


xxx

Spatial Manager™ for BricsCAD xxx


'SPMSEARCHLOCATION' command in the Spatial Manager™ for BricsCAD ribbon


'Search Location' window

'Search Location' window


xxx

The Spatial Manager™ for BricsCAD


Need to have some reference in the drawing to use 'Search Location'?

If the drawing is not empty when 'SPMSEARCHLOCATION' is executed, it is necessary that the drawing has been assigned a Coordinate Reference System (CRS) in order that the application "knows how-to" insert the selected geometries. If this is not the case, you can assign a CRS to the drawing (and modify it) using the command 'SPMSETCRS' of Spatial Manager™ for BricsCAD. By executing this command you will access the CRS catalog of the application where you can:

  • Filter the CRSs by type (Geocentric, Projected, etc.). The type "Projected" will be selected by default because is the most common choice
  • Choose a CRS by clicking on its row in the table
  • Search CRSs by typing the search criteria in the "Search" box. You can type here as many words as you like separated by blanks. The application will find all the rows including all these words in any column of the table
  • Unassign (undefine) the Coordinate System of the drawing, by choosing "Undefined CRS" (EPSG 0)

If the drawing is empty and has no coordinate system assigned to it, when 'SPMSEARCHLOCATION' is executed Spatial Manager™ for BricsCAD will assign the CRS Code:3857 (WGS84 / Pseudo-Mercator) to the drawing. This CRS is valid for any Earth area, but may be inaccurate for measurements in some areas. If you want to configure any other known local CRS, use the 'SPMSETCRS' command as explained above


'SPMSETCRS' command in the "Spatial Manager™ for BricsCAD ribbon


CRS catalog of the application

CRS catalog of the application


Related links


Spatial Manager™ for BricsCAD product page Download Spatial Manager™ for BricsCAD