Spatial Manager™ for BricsCAD - FAQs: Terrains ("Professional" edition only)

From Spatial Manager wiki
(Difference between revisions)
Jump to: navigation, search
m
m
Line 56: Line 56:
 
***''Notes:''
 
***''Notes:''
 
****''If any [[Spatial_Manager%E2%84%A2_for_BricsCAD_-_FAQs:_Background_Maps_(%22Standard%22_and_%22Professional%22_editions_only)#How_can_I_display_a_.27Background_Map.27_in_the_drawing.3F | Background Map is shown on the drawing]], this will be automatically selected though you can select any other''
 
****''If any [[Spatial_Manager%E2%84%A2_for_BricsCAD_-_FAQs:_Background_Maps_(%22Standard%22_and_%22Professional%22_editions_only)#How_can_I_display_a_.27Background_Map.27_in_the_drawing.3F | Background Map is shown on the drawing]], this will be automatically selected though you can select any other''
****''The drawing must be [[Spatial_Manager™_for_BricsCAD_-_FAQs:_Background_Maps_(%22Standard%22_and_%22Professional%22_editions_only)#Need_to_have_some_reference_in_the_drawing_to_use_the_.27Background_Maps.27.3F | geolocalized]] before using this option''
+
****''The drawing must be [[Spatial_Manager™_for_BricsCAD_-_FAQs:_Background_Maps_(%22Standard%22_and_%22Professional%22_editions_only)#Need_to_have_some_reference_in_the_drawing_to_use_the_.27Background_Maps.27.3F | geolocalized]] and saved in order to apply this option. A "material" PNG image of the map will be saved in the same folder as the drawing''
****''The drawing must be saved before selecting this option. A "material" PNG image of the map will be saved in the same folder as the drawing''
+
 
****''The drawing Visual Style will be automatically changed to "Realistic" when you select this option''
 
****''The drawing Visual Style will be automatically changed to "Realistic" when you select this option''
 
****''As specified in a warning window, due to current BricsCAD limitations, it is necessary to save the drawing, close it and reopen it in order to correctly visualize the applied map texture''
 
****''As specified in a warning window, due to current BricsCAD limitations, it is necessary to save the drawing, close it and reopen it in order to correctly visualize the applied map texture''

Revision as of 10:56, 12 November 2019

Contents

Introduction

  • Objective of this section
    • To learn how to get 3D Points from elevation services, create 2D or 3D Contours and create Terrain 3D models
  • Topics in this section
    • Obtain elevation 3D Points in the drawing from elevation services for any earth area
    • Create 2D or 3D Contour Polylines from 3D Points
    • Set Contour options such as density, colors, layers, labels, etc.
    • Create Terrains models from 3D Points and select entity type for new Terrains
    • Configure any 'Background Map' and related options to project and fit it on one or more Terrains (BricsCAD 19 and upper)


Note: Some components in the images on this page (providers, names, windows look, etc.) may be slightly different from those that will appear on your computer




How can I get elevation 3D Points, create Contours or Terrain 3D models?

Spatial Manager™ for BricsCAD includes the 'SPMTERRAIN' command that allows you to create Terrains and other related entities. Three options are available when this command is executed:

  • 1 Elevations, which is a shortcut to get 3D Points on your drawing from Internet elevation providers in any earth area
  • 2 Contours, which is a shortcut to create 2D or 3D Contours in your drawing from 3D Points. Below you can review the options available for this function
  • 3 Terrain Wizard, which allow you to access the Terrain wizard in order to run one or more Terrain chained processes (Obtain elevation 3D Points, and/or create Contours, and/or create Terrain 3D models, and/or project any Background Map to Terrains)

As you can see in the following image, these options are found on any application interface component ready to run separately


'SPMTERRAIN' command (3 sub-commands) in the Spatial Manager™ for BricsCAD ribbon


What are the contents of the different sections in the Terrain wizard?

The Spatial Manager™ for BricsCAD Terrain wizard (Third button in "Terrain" group) includes three sections (see the image below):

  • Source - Starting data. Select one of the following options:
    • Select points from drawing. Allows you to select any number of Points in your drawing in order to create Contours (Polylines) for this point cloud, and/or create one Terrain 3D model for this point cloud, and apply (project and fit) a Background Map texture to this Terrain (BricsCAD 19 and upper)
    • Elevations from online services. Allows you to define an rectangular area in your drawing for any earth location in order t0 create a 3D Points grid from Internet elevation providers in the selected area, and/or create Contours (Polylines) for this point cloud, and/or create one Terrain 3D model for this point cloud, and apply (project and fit) a Background Map texture to this Terrain (BricsCAD 19 and upper)
      • Notes:
        • You can choose the grid resolution in meters. Available values are proposed and limited according the resolution returned by the elevation service
        • The drawing must be geolocalized before using this option
    • Terrain. Allows you to select one or more Terrain 3D models in your drawing (BricsCAD 19 or upper) in order to apply (project and fit) a Background Map texture to the Terrain(s)
  • Processing options
    • Reduce points to evaluate
      • If you selected 3D Points in the previous section (from the drawing or by creating a grid), here you can reduce the number of points used in the calculation of entities in the next section (3D Points and/or Contours and/or Terrain)
      • A reduction of points will improve the speed of entities generation but will result in entities with simpler geometry
    • Elevation exaggeration
      • This factor will multiply the resulting Z coordinates of entities calculated in the next section (3D Points and/or Contours and/or Terrain)
      • The exaggeration does not affect the numerical values that may result from the calculation, such as the elevation labels or the values in the elevation table of the contour lines (see next article)
    • Note: You will see at the top of this section the total number of entities currently selected
  • Objects to create - Resulting entities. Depending on the option you have chosen in the first section, you will be able to select one or more of the entities to be created in the process
    • 3D Points
    • Contours. See the "Contour options" in the next article
    • Terrain. You can choose what BricsCAD 3D entity will be used to create the Terrain 3D model. The available options depend on each BricsCAD version
    • Apply map texture to terrain. You can select any available Background Map (preset or user-defined) whose images will be projected an fitted to one or more Terrains, as well the desired map detail level (BricsCAD 19 and upper)
      • Notes:
        • If any Background Map is shown on the drawing, this will be automatically selected though you can select any other
        • The drawing must be geolocalized and saved in order to apply this option. A "material" PNG image of the map will be saved in the same folder as the drawing
        • The drawing Visual Style will be automatically changed to "Realistic" when you select this option
        • As specified in a warning window, due to current BricsCAD limitations, it is necessary to save the drawing, close it and reopen it in order to correctly visualize the applied map texture


'Terrain' wizard window

'Terrain' wizard window


How do I create Contours and what options are available?

As you can read in the previous articles, in Spatial Manager™ for BricsCAD you can create 2D or 3D Contour Polylines through the Terrain wizard ('SPMTERRAIN' option '3 Terrain Wizard' - Third button in "Terrain" group) or directly through the Contours shortcut ('SPMTERRAIN' option '2 Contours' - Second button in "Terrain" group). You will find the following available Contour options (see image below):

  • Top group
    • Minor interval. Contours Interval (Minor Contours)
      • Note: At the bottom of this section you will see the total number of Contour Polylines that will be created according to the chosen interval
    • Major every. Every how many Minor Contours one is considered Major Contour
    • Smoothing. Contour Polylines smoothing level
    • Layer. Layers for Minor and Major Contours
  • Colours. Colour models. You can choose one of the following options:
    • None. By layer. If it is necessary to create new layers according to the ones defined in the previous section, they will be assigned random colors that will be different for the Minor and Major Contour Polylines
    • By contour type. You can choose the colours for Major and Minor Contour Polylines
    • By altitude. The Contour Polylines will be created using an automatic colours ramp from which you can choose the colours for the lowest Contour and the highest Contour
  • Labels. Contour elevation Labels
    • Label elevations. Check it if you want Labels
    • Label also minor contours. The Major Contours will be labeled but you must check this option if you also want to label the Minor Contours
    • Style, Justify, Height. You can define the Style, Height and Justification of the Labels here
    • Insert a label each. You can also specify the separation in drawing units between Labels to be repeated along the Contour Polylines
    • Note: The number of decimals places for the numeric values in the Labels will be consistent with the Contour Interval chosen above
  • Elevation options
    • Create contours without elevation (2D). Contour Polylines will placed in their corresponding Z Elevation (3D Contours) unless you check this option to place them in the XY plane regardless of their Elevations (2D Contours)
    • Append data table with elevation values. When checking this option, the Contour Polylines will be attached to a data Table that will include the "Elevation" field. The Table will also include another field ("Major") that will indicate if it is a Minor or a Major Contour. You can specify the data Table name below


'Contour' options

Creating Contours options


Related links

Personal tools
Namespaces

Variants
Actions
Navigation
Products
Toolbox