Spatial Manager™ for BricsCAD - FAQs: How to Start?

Important notice: The latest available version of Spatial Manager™ for BricsCAD will run on Bricsys software v.13 to v.20 (more information on the page Compatible BricsCAD applications)

A powerful BricsCAD plug-in but, how to Start it?

If you come here from the shortcut that starts the application, go directly to the paragraph below that starts: "Finally, when you install Spatial Manager™ for BricsCAD, the setup application..."

Have you downloaded the setup program? If not, you need to download it from the Spatial Manager™ for BricsCAD download link

First of all you need to install Spatial Manager™ for BricsCAD by executing the setup program. The name of the file to run will be different for each release of the application. It will appear as follows: SpatialManagerforBricsCAD-X.exe, where "X" is the release number of the application

• Notes:
  • 32-bit and 64-bit versions: There are 32-bit and 64-bit versions of Spatial Manager™ for BricsCAD but you do not need to worry about what platform is selected because the setup program automatically chooses the same version as the BricsCAD installed
  • If the installation process does not produce any errors but later you cannot execute any 'Spatial Manager™ for BricsCAD' commands and/or the application's user interface does not appear in BricsCAD, please run BricsCAD "as administrator" and try again
  • "Quiet" setup: You can install the application in "quiet" mode using the "/quiet" parameter, which will adopt the default values (installation path, etc.) and it will not be necessary to follow the installation process step by step. For example, from the Windows command line you can execute: [Path]/SpatialManagerforBricsCAD-X.exe /quiet
    • "[Path]" is any local or networked path, where the installation EXE file can be found
    • "X" is the release number of the application
    • Note also that this command can be executed from a batch file (*.bat), which will facilitate the deployment of network or remote installations

Next, you will see the Spatial Manager™ for BricsCAD icon placed on the Windows Desktop, which will let you return to this Wiki page anytime you want to

Finally, when you install Spatial Manager™ for BricsCAD, the setup application also adds the Interface components to BricsCAD and a Sample data set including some spatial files to your system. Watch this short video and follow the next steps to learn how to start using the application and to check that everything works fine

• Note 1: The Sample data folder (and subfolders) is a read-only folder, so select another folder when trying to write data through Export processes, etc.
• Note 2: Some components in the video and images on this page (interface, windows look, etc.) may be slightly different that will appear on your computer

• Start BricsCAD and create a new drawing
• Options to access the application Commands
  • New "Spatial Manager" tab in the BricsCAD Ribbon (if the Ribbon is available)
  • New "Spatial Manager" Toolbar
  • New "Spatial Manager" drop-down Menu

• Click on the "Show Palette" button to open the SPATIALMANAGER palette, which includes the main functions of Spatial Manager™ for BricsCAD
  • If you cannot or you do not want to access to the Ribbon, Toolbar o Menu, key in "SPM" in the Command line to open the palette
• Expand the "Sample data" Shortcut to access the sample Shapefiles (SHP)
• Right-click over any Shapefile (SHP) to import the spatial information as BricsCAD Entities into the current drawing or into a new drawing
• Use the default parameters in all the Wizard windows
• Check the imported BricsCAD Entities
  • Note for Trial version users: take a look to the application Limitations in this Version
• Import more Shapefiles (SHP) into the same drawing or into new drawings while choosing different import options
• Try to import other kind of spatial files such as Google Earth KML, GPS/GPX, SQLite or XYZ point files
  • Note about Coordinate Reference Systems (CRS): if you want to merge into the same drawing spatial data which has been saved using differents CRSs, you need to Transform the Coordinates of the incoming data so that they are consistent with each other. This can help you learn how the Coordinate Transformation works in the application. In the sample data set, the Shapefiles (SHP) and the SQLite and XYZ files were saved using the CRS "WGS 84 / Pseudo-Mercator" (SRID=3857), and the KML and GPX files were saved using the CRS "WGS 84" (SRID=4326) (mandatory for these formats)

So what now?

Now you can try to import your own spatial data and create your own Shortcuts and User Data Sources. We recommend you take a look to these Wiki pages to learn more about:

• Application introduction, main features, demo videos, Commands list
• Licenses, activation, support, updates, purchasing options
• Current compatible BricsCAD applications
• Application Data Providers
• Interface, Wizards, Options, Configurations
• Data sources, Shortcuts, User Data Sources
• Spatial files
• Databases, Data stores
• Import processes, parameters, coordinate transformation, extended data, tasks
• Export processes, parameters, coordinate transformation, export to Google Earth, extended data ("Professional" edition only, except "Export to Google Earth" on "Standard" and "Professional" editions)
• Create or edit data tables, attach, detach or select entities ("Standard" and "Professional" editions only)
• Use Background image Maps, reference Maps ("Standard" and "Professional" editions only)
• Create elevation 3D Points, 2D or 3D Contours or Terrain 3D models ("Professional" edition only)
• Application Programming Interface (API) ("Professional" edition only)

And some useful links to other pages of Spatial Manager™ for BricsCAD:

• Changelog
• Coordinate Systems objects list
• End User License Agreement
• Spatial Manager™ web

Related links

• “Repair” when adding or updating BricsCAD products